| 路沿石模具维护保养 |
| 添加时间：2019/12/20 14:41:15 浏览次数： |
| 路沿石模具维护保养 Maintenance of curbstone mould 1、长时间使用路沿石模具后必须磨刃口,研磨后刃口面必须进行退磁,不能带有磁性,否则易发生堵料。 1. After using the curbstone mould for a long time, the edge must be grinded, and the edge surface must be demagnetized after grinding, without magnetism, otherwise it is easy to cause blocking. 2、路沿石模具在使用过程中冲头易出现折断、弯曲和啃坏的现象,冲套一般都是啃坏的。冲头和冲套的损坏一般都用相同规格的零件进行更换。 2. In the process of using the curbstone die, the punch is easy to break, bend and gnaw, and the punch sleeve is generally gnawed. The damage of punch and punch sleeve is generally replaced with parts of the same specification. 3、路沿石模具保养时检查各部位的配件关系及有无损坏,对损坏的部分进行修复,气动顶料检查有无漏气现象,并对具体的情况采取措施。 3. During the maintenance of the curbstone mould, check the relationship between the parts and whether they are damaged, repair the damaged parts, check the pneumatic top material for air leakage, and take measures for the specific situation. 4、路沿石模具弹簧等弹性零件在使用过程中弹簧最易损坏,通常出现断裂和变形现象。采取的办法就是更换,在更换过程中一定要注意弹簧的规格和型号,弹簧的规格和型号通过颜色、外径和长度三项来确认,只有在三项都相同的情况下才可以更换。 4. In the process of using, the spring is the most easy to be damaged, which usually appears fracture and deformation. The method to be adopted is replacement. In the process of replacement, it is necessary to pay attention to the specification and model of the spring. The specification and model of the spring are confirmed by the color, outer diameter and length. Only when the three items are the same can they be replaced. |
| 上一页 高速钢模具具有的特殊性质 |
| 下一页 路牙石模具采用工程pp(聚丙烯)原料 |