转让电话：13313028229联系我们
保定市模具模板制造有限公司
转让电话：13313028229
邮箱：
新闻动态
护坡模具的冬天保存
护坡塑料模具生产工艺如下，在护坡塑料模具内装入混凝土震动成型，自然凝固干燥后脱模具就可以使用了，用厂房，适用于生产条件简单的野外场地，备有振动台、搅拌机即可生产，水泥制品表面光滑，不变形，不用托板，脱模时间短，周转次数快，可定做各种尺寸。
The production process of the slope protection plastic mould is as follows: the concrete is shaken into the slope protection plastic mould, and the mould can be used after natural solidification and drying. The factory is suitable for the field site with simple production conditions. It can be produced with shaking table and mixer. The surface of the cement product is smooth and not deformed, and no bracket is needed. The demoulding time is short and the turnover times are fast. It can be customized to various sizes.
护坡模具的冬天保存
Winter Preservation of Slope Protection Mould
护坡塑料模具材质为聚丙烯工程塑料，在冬季保管中要避免阳光直射，室外冰冻对模具的损害也是比较大的，一般采用库房堆垛存放，会延长塑料模具的使用年限。
The plastic moulds for slope protection are made of polypropylene engineering plastics. In winter storage, the direct sunlight should be avoided. The damage to the moulds caused by outdoor freezing is relatively large. Storage in warehouse is usually used to store the moulds, which will prolong the service life of the plastic moulds.
The production process of the slope protection plastic mould is as follows: the concrete is shaken into the slope protection plastic mould, and the mould can be used after natural solidification and drying. The factory is suitable for the field site with simple production conditions. It can be produced with shaking table and mixer. The surface of the cement product is smooth and not deformed, and no bracket is needed. The demoulding time is short and the turnover times are fast. It can be customized to various sizes.
护坡模具的冬天保存
Winter Preservation of Slope Protection Mould
护坡塑料模具材质为聚丙烯工程塑料，在冬季保管中要避免阳光直射，室外冰冻对模具的损害也是比较大的，一般采用库房堆垛存放，会延长塑料模具的使用年限。
The plastic moulds for slope protection are made of polypropylene engineering plastics. In winter storage, the direct sunlight should be avoided. The damage to the moulds caused by outdoor freezing is relatively large. Storage in warehouse is usually used to store the moulds, which will prolong the service life of the plastic moulds.
